check to make sure your cables are putting her in FWD all the way, seen a couple where the cable wasn't and caused the slippage:( after...
Buy the oil-burners, the gasers at speed will kill your fuel money, I have a 3607 and at 17 knots 1 to 2' chop in to the wind 250 gallons of gas...
3607 list to STBD but both helms and galley are on that side, and only the heads and two ac's on the port, I think two group 31's should fix it...:)
are you sure the trans is going fully in gear ? If so I'd say it would be time for replacement of you friction plates.
sounds like you need to pump up the system,
welcome, The more the better for all..:)
I love Carvers but most are boats made for 3 to 4 footers and when the time comes it'll be a boat made for open water to spent 6 months on, and I...
I use Buff magic on mine then Rejex over that she's an 87 3607 and I think she looks good all season, wash at least once a month
OK so 10 MPH not 10 knots and with a 1 MPH that would put you at around 8 knots...wouldn't it?
Terry, what year ?
let us know what you get going up river...I get best mpg at 8 knots here where tides are ever changing I get 1.6, How much push was you getting...
the 502 has had a good record..and yes I know a few guys that has then Black and Blue ones whats leaking...? that's the ? some oil leaks are...
+1 on all the above, need more info to help you
the 502's will push her for sure. But the boat is and can't be a speed machine. At WOT you're asking the 502 to work hard, it's like asking them...
have the engines checked and the low rpm could be from a dirty bottom also, the smell, the waste lines need replaced I bet, it's a DIY but it's...
I'd have to say you'd use more at the lower speed, at 10 knots the boat will be pushing water instead of planning, and your hull speed should be...
she'll do you just fine in the bay, our 3607 hates following seas so beware of that, Carvers are not big water boats. I've had mine out off Va....
have a 87' the crap grinder should be put of you water closet Fwd and Aft. Fwd one pumps to the holding tank under the aft bench of the...
we just moved to Deltaville Va. from MobJack bay. We have a 87 3607 and you?
try using some buff magic on it then pro-polish works great on my 87' 3607:)
