Information post if anyone else is looking to add one. Just installed the LIST TM-322 multi-level holding tank sensor in our 1989 Post 43. The...
Strangely enough I have the installation instructions for it. Here is the wiring figure.
I finally found the AP IMU processor! It is located in the cabinet in the cockpit (the old Robertson IMU sensor is still under the lower bunk by...
Since I was under the helm wiring I wired in a manual over-ride switch for the aft pump. Have one on our Viking and have found it useful so added...
Thanks for the date. My wife requested to join the Post group on FB, I don't use FB. I'm on travel that week, will depend on when I actually get...
When is that? Planning to go to Cambridge for Maritime Festival the end of this month.
Did you get photos of the transom view of both? Would like to see the difference and compare to mine. [ATTACH]
Found abandoned cables from breaker box to helm (the old ignition arm switches) and repurposed one so now have a working aft bilge pump operating...
A little more checking and my boat must not match the wiring schematic. The line that it shows as bilge pump indicator light blue/black is always...
The aft bilge pump outlet on our boat is a good 6" above the static waterline. (The exhausts are completely out of the water as well).
I had a thought related to your question. When at rest is the forward end of the side spray rails above water on one boat and not on the other?...
That is what I expected but not what I am getting. If the indicator is wired to just the manual lead it behaves that way. When in manual the...
With help from board member Davidoc's terminal strip schematic I was able to locate the under helm connection for the (not currently connected)...
Sent you a conversation msg - Thanks
Look the same. Size on mine is 4-1/4" x 6-1/4" outside dimension.
Surprisingly no. Cars, boats, airplanes all like it when they can draw a little blood but today came out clean. Doing more wiring clean up...
I missed the second page with the terminal strip assignments on my phone when I was in the bilge. That is exactly what I needed. BIG Thanks
I spoke with him and he doesn't have any info on making them, but does have the teak for a blank to make one myself.
Traced down and corrected the forward bilge pump wiring (removed a prior owners lamp cord bypass). Have the aft pump back to running through the...
I could use the aft bilge pump on indicator wire color/connection at the helm.
