That's not always true with wire size. If the run is longer, you'd need 12 gauge or even 10 gauge to carry the same 15 amp load. Also some...
A cockpit really makes a motoryacht. Makes it much easier to board when stern to, much easier to get lines, carry things, swim/dive/fish. I ran...
LOLOL, this reminds me of a 54' Bertram I ran a few times many years ago. It had 6500 hours without rebuilds. When you started it, it would grey...
The 54' I ran with 12v92's didn't do any better on speed than a 12v71 boat. It only had a hardtop as well. It would do 23 knots at 1900...
A 63' Hatteras MY with stabilizers (early 2000s) would be in your price range. It would do ok in 3-5' and be a little uncomfortable in 4-6', but...
I've run lots of different Hatteras, but never a 68' SF. I'll ask a friend of mine who I believe has run one.
What 68' Hatteras? Sportfish, motoryacht? What year range are you looking at, because 68' does not ring a bell with me at all and I've run tons...
I have seen additives such as those from Diesel Kleen help considerably on boats that seldom move. That being said, I've managed 10+ yachts at...
I believe those Attwood lights are going to project a narrow beam more like headlights or a flashlight and not what you're looking for. Try...
Yeah, it's a good idea so you don't get condensation in the fuel tank.
I would replace the fuel filters annually. Turn off the fuel for the winter? It's real easy to shut a few valves so you might as well.
No I think he wants the ones that mount on a flat surface (not recessed). I know what you're looking for but don't know who makes them. Call...
They are expensive, like $80 each and if I remember correctly each motor takes 2. Buy your oil filters from MTU as well if not just for piece of...
It looks like a Grebe motoryacht, other than that I know nothing.
http://www.glendinningprods.com/gmp/pdfs/eec1m_v8a.pdf See pages 85-97, print them out and bring the pages to the boat and have a pen and paper...
They sell the shaft to hook to a drill for most all gas motors to prelube them with a drill. You can get them from any automotive online store...
Yes, I'd probably plumb a Y valve into the intake side and a shut off valve on the discharge side of either pump. One caveat is it would be easy...
That's if you have enough battery power by the time you find out the shorepower has been lost to start it. If it will even start when it's so...
You're going to want a dedicated breaker and wiring for the DC pump, also install shutoff valves before and after each pump would be a good idea...
He's looking to BUY a computer, not issues.
