I have seen that with ZF pods as well. The funny thing was, they were doing the finger pointing with a major boat manufacturer (big vibration...
Take a look at Tiara, and the 40' Cabo zues boat is an incredible riding boat with incredible range. Hotels are CHEAP compared to the wrong boat....
The good luck with a manufacturer that you've had in MO, DOES NOT equate to the same good luck in the hot summer sun in Florida and saltwater.
At that age it really shouldn't matter as to closed cooling or not. A stern drive on a lift should be fine. On 40' I'd want diesel and closed...
8 gph at 1000 Rpms. 6 gph at 800 rpms for both.
No. Helpful in most situations yes. The issue with the Yacht Controller is all you have are gears, no throttle. So in normal situations it is...
It depends. Is the "project manager" doing any of the work? I normally charge around $30 hour to babysit people and $60 an hour for mechanical...
I don't know the extent of it, both companies are owned by Brunswick Corporation. But just ran a 2018 yacht with 600HP Zues. EVERYTHING on them...
What is the name of the boat? I used to run one of those, it had blue marble counter tops in the galley.
Meguir's stuff is crap. See if you can get Presto compound and Presto makes an excellent synthetic wax...... if not, get Aqua Buff compound and...
54' Hatteras is an incredible running boat. But it's also thirsty. The 2003ish era with C30's burned 112 GPH at 34 knots. The old Post molds...
Check your grounds perhaps. That and the engine controls are common to both engines. Something might be back feeding them. But I don't know. Get...
Well, a boat yard makes constant money year after year. It's a lot more consistent than selling new yachts. I would say there have been several...
If it rolls at the dock when you step onto it, it's going to roll underway (at least at slow/idle speeds). Now on plane it might not at all, that...
And a TON of money.
The former Lazarra factory that Bertram is currently in
Yeah for about 1 hour.....not for a 10 hour day at cruise!!
Check fluid level, then check filter or filter screen. If both of those are fine, it's most likely the pump. Perhaps you can find a pump for it.
Yes a TV can be flush mounted. Why not just mount a bigger one right on the wall where the old ones were? Another option is to check computer...
