Ditto on bigger is more roomier and better ride. Soft goods and electronics can make a huge difference in price.
Wow, huge project. What is your ultimate goal with the redesign? How are you going to handle the exhaust? Looking forward to seeing your progress.
I got a 44 earlier this year and love the boat. I prefer the galley being separate from the salon. My wife and guest love the second head. I know...
It is your boat, I would not leave halogens bulbs in a quasi-off state. I have seen one boat burn up from a halogen bulb. One picture of the...
My guess is that you can. The 4 and 5 terminals are probably for turning the puck on and off. How is that accomplished? A picture of those...
I bet you can find a replacement pot on-line from Digikey.com
The pot is easy to check out if you have a multimeter. If so turn off the power to the circuit. put the meter in ohms, 10 kohm scale, put the...
Turn the pot over and take a picture of the back or wherever the printing is located. I have one more trick if there is no printing on the pot.
Mine were screwed on. The insignia have blind threaded female fasteners for studs. The nuts were visible from inside the cabin, two on each word....
On my 44 SS the freshwater pump is under the center bunk in the quest stateroom. The hot water tank is located under the outboard bunk in the...
My initial thought is that your pump has its own power, that is to say that it is not wired to the A/C breaker. Look for another breaker or trace...
In my case the ram showed signs of leakage. I guess you could cap off the lines going to the ram and see if the head will lock up, just a guess...
My 1987 44 SS had the same problem. I rebuilt the steering ram, pretty easy, replaced all the fluid and after bleeding the air out, my system is...
One to perhaps as high as 1.25 kt/gallon. The benefits of running on one engine is unique to each boat. I think generally it will be less...
If you are fishing go stabilized, I have only used Fujinon and they work great.
The estimate can be fine tuned by the specifics but you should burn about 3 to 4 gallons per engine for a total of 6 to 8 gallons/ hour at 7 to 8...
Very Nice: Looking forward to seeing you in the So Cal Bight
Why not pop out to old acrylic and have a new piece cut and reinstall with silicon suited for acrylic such as GE-55
Wonderful!
Ken: Great idea, how do I edit the original post?
