Click for Ocean Alexander Cick to Clean Black Water Click for Northern Lights Click for YF Listing Service Click for Cross

Furuno DFF1 and B260 or DFF3 and R99 Transducer

Discussion in 'Electronics' started by Ormond Bert54, Feb 27, 2010.

You need to be registered and signed in to view this content.
  1. Ormond Bert54, Feb 27, 2010
    #1
    Ormond Bert54

    Ormond Bert54 Senior Member

    Joined:
    Mar 29, 2009
    Messages:
    470
    Location:
    Ormond Beach, FL
    Anybody got one of the fancy DFF3 and R99 2 KW Transducers?

    I trying to figure out whether I need to spend $2k or $4k on a good sounder setup for my Navnet 3D in the Bertram 54.


    Mike
  2. Bill106, Feb 28, 2010
    #2
    Bill106

    Bill106 Senior Member

    Joined:
    Jan 9, 2010
    Messages:
    390
    Location:
    Beaufort NC
    Haven't used the new DFF3, but have used the BBF3's with the R199 2 KW in-hull ducers with great success. You have to be careful of placement, but I'm sure there are a lot of 54's out there with them. The R99 is a HUGE beast and with the fairing block it could cause her to lean over at cruise. Done properly, the in-hulls work nearly as good as the externals, and don't have the trim and drag issues.
    Bill