The foot to ear dimension is 1/2" wider, the adjustment tensioner bolt is 3/8 verses 5/16 and the case diameter is about 1/2 wider. It is...
Well I bit the bullet and installed a CS144 on my DD. The fit is tight but I got her in place. On the stbd engine I had to rotate the housing 180...
This is what I got from another member, it may provide some help. A friend of mine had a 38 Ocean and it was chocked at the very end of the keel...
In my previous boat I installed the Home Depot Lux Vinyl tile, I did not like it. Too heavy and easy to nice at the hatch edges. Current boat has...
Lepke, Thanks for your input.
CR: Not sure I follow: On most inverters-chargers, current can be reduced, lowering the alternator load. This could help your current draw off the...
The 1680 watts is peak, when they all cycle on. Typically when I go on 5 day fishing trip, when I shut down for the night, I run some bridge...
Well my memory not so good, just for info one gear cover blank and one driving the water pump. But I have two v-belt grooves on the crank pulley...
Good info on the 1/2 fat PTO belt. Yes, both of the gear cover plates are blank. Are you thinking of changing over to a gear driven alternator? I...
The 31 SI is a beast, bigger in all dimensions. I like the 12SI option, more amp and improved in many areas and basically the same size. Will go...
Mine are TIBs and v-belt driven,. I only have one v-belt groove on the front crank pulley. Yes when running all the house items off the inverter...
Hi, has anybody upgraded their V-belt driven Delco Remy 10s1 alternator to a Delco CS144. Looks like there is enough room and I sure could use...
Just a reminder, the pump comes in clockwise and ccw rotation. One rotation is about 100 bucks but the Ccw is about 300 buck, all in addition to...
I have almost the exact issue on my Ocean. I endoscoped all around the tank and the only wet spot was the aft inboard corner at the amounting...
Just a counter point, while I do agree a 22 year old boat can hold lots of secrets, I do not agree that it is too old. Typically you do not go...
I'm not the expert there but it comes with a real thick gasket and I don't think that joint is wet except when running. I do share your concern...
These guys make a replacement in cast stainless steel elbow that looks much superior to the original cast iron or a welded stainless mixing elbow...
My rule of thumb is to stay in 100 fathoms of water or more at night time. There are a lots of fishing gear down there, particularly lobster traps...
The deck to holding tank hose could be collapsing under the suction. Have you investigated that area?
190 appears way to high at cruise, not convinced the problem has been solved. My temps at cruise are around 175 on both engines. The thing that...
