I've tried many products over the years. On my last boat, an older trawler that was painted with awl grip end had a very sooty deisel, I used...
You might be right! The issue with mine was that it would fill with water - but it would never drain it! The mechanic that replaced my washer...
I have a 2007 466. My shutoffs are behind the central vac that is located in the cupboard beneath the washer/dryer. I had to pull the central...
My 466 has a hardtop and I must say that it really is nice instead of canvas. No leaks at all and better insulation for heat and AC. The lights...
Here's a picture of one of the dings.
I have a 2007 466 with wooden countertops in the salon. There are a few gouges on one counter, and a couple scratches. I called carver and...
I have a 2007 466 that I've had for a year. My previous boat was a 47 Marine Trader with stabilizers, and I've driven a buddy's 52 Sea Ray Sedan...
I already had drop fins. The problem was that Carver I ended up replacing the single Bennet's with dual Lectratab HD units and having a local...
With the addition of the new dinghy I'm finding the boat just won't pull out of the water as it did. There was a tab leak found over the winter...
Actually the intake side of the pump is quite nicely designed. It comes in straight and the run from the thru-hull to the strainer is about a...
I had a hard time priming mine last week. I have 6 units on the boat. When I arrived for launch, the marina had already launched and started...
My wife was on both our hard tops waxing them. They feel fine for her, but she weights about 110. I don't feel so confident, but I weight 220.
Priming each ac unit's water line was a huge pain. I've never had to prime each unit itself even after the pump is primed, but that's what I had...
Thanks Maxwell! I'm heading up tomorrow and plan on staying for the weekend. I'd like to get some last things ready for the season and it...
Thanks! Now I just have to figure out how warm the water is :) I have a depth/temp sensor installed on the nmea2k network I put in over the...
My boat is going in the water in 2 days and I'm wondering if the heat will work.
This boat is gelcoat. The last was awl grip.
I started off with the 3M paste wax. I was told to apply and then leave it for 30 minutes or longer to harden, then take off. It took forever to...
I plan to keep it up, but I'm glad I don't have to do it again for a while now. My body is pretty sore from the last 3 day marathon finish.
I've never compounded, polished, or waxed before. My last boat was painted with Awlgrip, so I really didn't have to do much more than wash....
