It projects forward of the waterline interface.
Well, the design of the boat doesn't support securing the anchor on deck, it has a well it goes in. First thing one does when heading out on one...
Unless you are staying with the flooded cell battery for cost reasons, there is no good reason not to use an AGM for cranking. I would suggest...
In every life or death situation I've had the CG respond to, they responded with either a helicopter or a C-130. I don't want them responding...
No more contemptible than the CGmen operating in an unsafe manner. If he would have crossed the bay and went down the channel, there wouldn't have...
Who said it wasn't available as a separate component? Did you take it to an auto electric shop or the dealership? I ask because I've never seen...
They came in a pretty wide spectrum of power ratings and you can figure at least 150gph at WOT. Parts availability is good. You are correct, they...
Negative on two fronts. That rule (as do all the steering rules) have two critical points to them, when they begin to apply (when risk of...
Well, there is no such thing as a "tune up" for a prop and shaft with no damage, so if you send off a good set of props and shafts to the shop for...
I don't mark them at all except 25' before I catch solid on the bitter end. I just go by the angle with it pulled up tight.
Clean fuel and clean oil, about all they take, general maint.... If it has some type of flex coupling, keep an eye on them as they vibrate pretty...
The construction problem is the multiple points of delamination evidenced clearly in the pictures, but even as such, would have required previous...
You'd only flip the switch if you are changing from Gell Cell batteries. Flooded Cell and AGM operate at the same voltage, it's the Gell Cells...
Nothing wrong with painting at 10 meters, but 10 meters isn't a shot. A shot is 15 fathoms/90 ft/27.4 meters.
No mods required, simple swap.
Once the images came into the public domain, there was no longer a need to keep telling stories. The only outcomes of continued comments would be...
I'm not aware of any prepregs that are not epoxies. All the prepregs I've worked with have been carbon fiber and all have required an autoclave...
It can, but what it is about is getting all the air out and getting better wetting.
Geez, what's with CG in San Diego....? Years ago my buddy turned over his Pacificat (not uncommon and I'd just flip him back upright using his...
Vacuum bagging is a process that is used after the layup. It can be done on either a hand layup or chopper gun spray.
