As a simple guy like me, this is way over engineered. If I saw that system in a prospective purchase, I'd scratch my head. You're creating a...
send me an email with you phone number, I'll give you a call?
Did the OP say above that these existing drain holes are open? Where does the exhaust water and CO go??
Seems like you are doing this for winter freezing? Why don't you rearrange the angle of the muffler, or just find a simple way to introduce non-...
Nice vessel. My side cabinet holds a freezer. To change the compressor I had to unfasten (unscrew) from the floor, bulkhead and side and then...
Send a pic?
Did the OP get his answer on probable fuel burn so he can paln his trip to FL?
If the outside gasket has deteriorated I don't think the linseed oil would help. The idea was to apply it to the dried wood to re expand it so it...
Run it to a bucket when you need to drain things? You're only going to use this to winterize, correct?
I think the glass itself is tinted, but I don' know that for sure. I still suggest a low heat. Tape some shrink wrap material over the windows...
I would get it dry first otherwise you just seal the water in. Can you use a hair dryer on low heat to help it along. Put fans by each window so...
The white dried out material for me was the sloughed paint. I clean all of that out. Let the wood thoroughly dry and then applied 4 coats of...
Agreed, Lineed oil is a type of water resistance for wood, but I also think when it is absorbed it helps replenish the dried wood so it expands...
My theory is that the linseed oil applied to the inside channel re-expands that wooden joint snugging the glass against the outside gasket. That...
I had that same problem on my 1998 and solved it with linseed oil after I let the wood dry. I have the theory that the constant sun dries that...
If you are talking about the fixed side salon windows check the inside wood plate and channel. It may be dried out. Several linseed oil...
Very Egg Harbor looking, obviously
Agreed, once you find a good one, hang on! I go to Mystic CT from Oyster Bay on LI for mine. Parts are more expensive also.
in m experience with my 10 cylinder 820 mans have been exceptional. I run an average of 125 recreational hours 1800 rpm is my usually run. for 19...
