ESSRTEE8 I have seen several boats in my area of operation painted by Viking in NJ. The workmanship was excellent. But I can' tell you what was...
Ditto +1. If you run the LI sound you know what a short wave period can do to your dental work, even if its only 2 feet high but tide and wind...
Congratulations and good luck. I know you have been thinking of this for quite a while
I have 2 chrome strap hooks fasted to the side of each door. they work quite well. Hook is screwed to the door. the eye is screwed to the edge...
My boat cruises 30 tops out 36 50' Ablative is my choice. No buildup of annual coats to be reckoned with. I put one coat on every two years and...
I personally still believe that drones and boat pix are intrusive enterprises.
Get your banner on to some drones - has to be way cheaper then those noisy choppers that scare the liquids out of you when they fly up behind...
Gorgeous refit!
That screen door is very, very nice. My screen snaps on and has a center zipper,
BTW, If it was salt water, you may want to rinse everything with a solution of Salt - X, or something like it ?
pretty nice boats, those POSTS
The fun of boat ownership. You might want to spend a day squeezing hoses, checking operation of valves, tightening screws bolts and clamps, etc....
Can you significantly move either of the rudder posts inside the boat? It only takes one to bind, but could be as simple as trailing junk as...
. My question is does anyone else have a hard time steering it into a hard turn when running fast or im I just nuts in thinking a 42ft boat can...
I'm assuming there was someone unseen operating the vessel at the lower helm - I believe that may rise to the level of criminal conduct if it...
I am assuming this is a typical Azimut with a bridge helm and a lower helm. If that's the case, did the captain also check the lower helm thru...
That's more fun!
Gotta send a diver down if you're going to sit dockside for 2 months in the NE.
Jerry I have a 50 with 820's, we have slow motored all over the east end without problems. In fact, depending on your gears and shaft seal set...
Mine hold up pretty well with just bottom paint. Maybe try some of that newish prop coating?
