When you have a candidate boat in mind, you can ask around for surveyor -- marine and mechanical -- recommendations in the area. And you'll also...
Can't comment on the boat or your questions about it, but... "that weather" will happen sometime or other, whether you planned to be out there in...
Our original is leaking, Looks to me like removal will be with a Sawz-All. Although it might be that first just removing the cubical water...
Probably would, but if your charger is in a dry location you might compare against their 3-bank ProNauticP series. Depending on in-place wire...
Sending unit and gauges rely on matched resistance curves, 10-180 Ohms and 233-40 Ohms being common examples. Note those example values are...
Not really intending to flog a dead horse, but... If I've done the math right, using Pascal's fuel/time figures, it looks to me like his: 10.5...
Still there, starboard side down. About 500 yards SSW from WR R2, looks like about 10' of water, a guess based on how much of the beam is visible...
Maybe intentionally? AIS says Annapolis was the destination, so maybe they diverted on purpose? We keep our boat in the West River, and there's...
Hadn't thought about alarms. Seems to me the CruzPro digital gauges, or maybe at least some of them, had an alarm capability. If that matters......
70'-ish overall, ~65' or so at the waterline? I'd say you'd be best off no faster than 10.8 kts... and any higher than that (until you're on...
I've read elsewhere about purpose-made conversion systems, but don't remember brand names or details. I think many start with J1939 (?) stuff......
1998 boat. Just-previous owner had the boat for 18 years, and apparently didn't change or tune the props that came to him. Any reason to suspect...
Ah. Better info. Didn't know. Sorry to have misled... -Chris
Can't speak to sizes, but Carver is still in business... so you may be able to discuss with them, If a real prop guy told me the props are "plain...
Once the engines are made right... it's not uncommon to do a WOT test... or use the results you have if the bottom was sufficiently clean and the...
Electrics (lights, gauges, etc.), electronics (plotters, radars, etc.), and "helm controls" (gears, throttles, steering, etc.) tend to be slightly...
Can't comment on the Navigator. Our SR hull is solid below the waterline, but predecessor and some other models apparently aren't... if that's...
Hum a few bars about your background and experience. Are you at the "never had a boat before" stage, or at the other end of the spectrum and...
We've been given a few, as we've met cruisers over the years... So I made a boat card for us... but usually forget to give one to anybody. The...
Usually nearer the stern, because usually that's where you'd board the boat. Can vary. Just keep using the Reply button. Do it right or do it...
