Do you know the history of the engine? When was it last run? Was it shut down or did it shut itself down? Clean fuel in the tank and valves on?...
What are you using for anti fouling on the shafts and wheeels? They look clean.
White smoke is common on the turbocharged 92 series at startup after they get a few hours on them mostly because the turbocharged version is 17:1...
Aft cg will greatly improve downsea handling in a Post. Unless we have to top off for a long trip we typically keep 100 gallons more fuel in the...
Those fans are available at Grainger.
The flex plates are built so that the hub will spin if you hit something or get a line fouled in a wheel. They're junk after that but it sometimes...
We live on St. Andrews's bay and have traveled the gulf from New Orleans to Key West in a 46' Post. Most of it several times. We can make...
I bought a replacement blower( complete) from Grainger for a Cruisair 12000. I had to glue some armaflex to it to keep it from sweating but the...
What caused them both to seize? Did it sink?
I had to buy a 5x10 sheet. It's hard to find and very expensive.
If you want to get an idea of how the added weight will affect the handling and performance you could strap on some 55 gallon plastic barrels and...
I have one on my 46 and like it. It was broken during hurricane Michael and I replaced it. Not just for the looks but it does turn some water when...
If you have to ask.... you probably wouldn't understand.
If I remove the mattress from the lower bunk there is a removable piece of plywood over the holding tank.
The PVC line teed off the engine intake may be a crash valve, I've seen PVC used in some Posts. What brand heads and pumps do you have?
Mine aren't going anywhere and I have spares!
Posts are simple straightforward vessels. Easy to maintain if you don't get behind. Let us know how the Cats run out. I'm sure there is more than...
Electric motors have much less torque at low rpms than they do at higher rpm, even AC motors with VFD's. I don't have stabilizers on my boat but...
The only time I could get to 2450 wot was after a fresh bottom job. After I repitched the wheels I can get there anytime and the speed numbers are...
My 93 46' came with 26x28 three blades. A few years ago I took 2" of pitch out of them to get the rpms back up to where they need to be.
