It's good to see a proper lookout posted on the bow. Not many do that.
Another possible improvement would be mounting a quality remote speaker in the overhead/headlining right above your better ear when standing at...
The uncleaned brush should be in plastic in the freezer next to the ice cream, though.
Could it have been arrival at waypoint? The gear we had on the last delivery did that. The plotter was Nobeltec TZ, though, but there's been a lot...
There's a lot of advancing technology on wrap material. I started to look into it at first as part of headlight restoration, and then progressed...
Thanks, Brian, good post. Turns out that Zuckerberg personally met with the President to put in his 2 cents on Tik Tok...
A good way to mount a transducer inside the hull is to site it first. If there are any air bubbles in the laminate, there will be a great loss of...
It's not something you can rely on. I tried to reach the USCG on every CG frequency from Cedros Island on the Baja one time and could not raise...
FWIW, a chain can be re-galvanized. Had one done once, and the results were not desirable. When they did it, they gathered up a number of loops...
+1 on the glue strips. Had a cucaracha problem on a yacht, and tried the bombs, sprays and "hotels". None worked for long. I learned that...
We do a lot of deliveries to/from Ensenada, MX. It's about 60 miles, and we get questioned about needing two people frequently when giving a...
No, no SS liners, and what you say is what happened. A little drool at the silicone hose, and snug up the T-clamps, then OK for a while. "E"...
That's what I thought until I had an issue with 3406 Cats that were overheating and distorting the fiberglass exhaust tubes. The engine temps...
Maybe try a local industrial bearing supply company. Walking in with the take-off bearing works best. I avoid Monday and Friday visits. They can...
Interior wood types are somewhat driven by veneered plywood availability. In general terms, I have seen many interiors that look like a match for...
This situation brings RER's post #13 from https://www.yachtforums.com/threads/leaking-shaft-seal.33223/#post-297314 to mind. If the engine is...
Good point!
Sea travel would likely be more than 10 days from anywhere in the U.S. except Hawaii, maybe, if that's a major issue. Many ships make multiple...
Good thought on a common point of failure. I don't know Carver's at all, but my first thought is that there's a relay in the circuit that provides...
There's a lot of discussion about old formula versus new formula, so don't let that $7.59 price get you too excited. I've got a bottle of old, and...
