I use 10 microns. I've had fuel issues on 4 different yachts under 2 years old running 30's, where the secondaries were plugged to the point we...
Bellhavn is a good stop, stay at river forest. You have free golf carts to go to town. Henry the owner is a great guy. Not much of a town, but...
I redid a 1998 58' Azimut wall coverings with whisper wall. many years ago.
Kike Gonzales got lost a long time ago. He hasn't replied since his first post.
Use the same size Rule bilge pumps. Get the Ultra switch Jr and mount it to the pump with the appropriately sized hose clamp. The UL rated or...
Then you're right where you need to be. As for the wiring, what exactly are you looking for?
I had one of these boats fly by me, way too close in GA when running a yacht down. He ended up at the same marina in St. Augustine. Then had to...
what does the boat turn WOT with full fuel, full water and 2 people? It sounds to me like your over propped? Should turn 2350 rpms WOT in the...
Yeah, you fly right to the fuel dock. Where you spend hours smelling gas and refueling at 6 gallons per minute.
no, I mean it’s totally normal for a 42-46’ post to do this. They, oceans, and some Carolina sf are not good sea boats with the waves a aft the beam.
THIS, and your autopilot will hold a much better heading than you ever will. Also you should be able to steer to over-ride the autopilot.
No, it is not true. Both Viking and Hatteras tend to have more boats at the Fort Lauderdale show from what I've seen.
Yeah, I've seen them T'ed. Check your shaft tube, the rust stain is odd, could it be possible that the shaft tube is clogged?
Look behind/underneath the helm in that area.
They're good pumps, make great pressure and even pressure. They did have a run of them several years back where the circuit boards went bad.
I would also install a jabsco 6-7 GPM with a seperate switch or breaker as a backup since you have 2 now.
In addition to this, Azimut almost always puts a breaker panel in the closet in each stateroom for that particular stateroom.
Is the tank fiberglass? It sounds like it is and the epoxy/paint/gelcoat etc. they coated the inside with wasn't mixed properly and is...
How many times have you flushed the tank out? I would probably think you'd have to do it 6-10 times. What material is the tank made from?
If it's DC, which I think it is that you have. The Jabsco variable speed 6 or 7 GPM ones are pretty quiet but not the best, headhunter makes a DC...
