Go the section you want to post in, threads then sub section such as engines, then in the top right of the grey area of the screen there is a tab...
great news
Common wire behind the dash that powers the entire strip of switches. They daisy chained the power wire from switch to switch.
Yeah, oil filters should be good almost forever as long as there's no corrossion inside of them. Impellors if they feel pliable and have no...
I don't rebuild seawater pumps, I replace them. The amount of money spent to rebuild them simply isn't worth the savings, and then the motor...
What was WOT rpm's/speed? Trim tabs should add 1.5-2 knots to your speed. You want to be closer to 2350 rpms than right at 2300 rpms with...
They do. MAN's really should see 2350 rpms with full fuel/water WOT. They rely more on RPM/BOOST/HP to make power versus brute torque like some...
Awlwood
I agree also
hopefully you get lucky and it’s just the exhaust manifolds. They’re expensive as it is, and I’ve had to have them removed due to exhaust leaks...
If it’s over 10 years old, replace it. Air handler should be in flybridge brow and accessed from bridge. Split units have a longer lifespan.
REPLACE, and quite frankly I'd put the pump on it's own breaker thats properly sized for it.
The arrid systems work......on boats with generally dry bilges.......but really some brands are never meant to and will never have a dry...
Being unconscious is probably what go the seller/boat here in the first place. Especially, Considering there are several dealers in the near area.
No, 80% load was around 1950 rpms. Bow was very high. Massive wake directly parallel with the center of the boat that went straight out 90...
I'm not a naval architect. But possible keel shape, hull shape, shaft angle, all of the above. It's a semi displacement hull, that can't break...
10' UNDER the keel or the vessel would not exceed 7.8 knots, no matter how much power you gave it. Anything over 1250 rpms with less than 15'...
Is it a Rolla certified prop shop? Rolla's are an entirely different deal, than your typical props.
I think you have a weak circuit breaker. Generally if a pump doesn't have adequate flow it will happen right away, or you'll get high pressure...
Ray Bock with Weber yachts is a very good and thorough broker.
