Yes it does ride higher IF you're running 25 knots or better and tab the tabs down all of the way to get stern lift. In very shallow areas (in...
There were some issues with switching from 2 stroke to 4 stroke with many builders due to the weight at that time. Many self bailing floors now...
That's pretty much how you have to run a yacht into the Rio Dulce in Guatamala.......Top speed and full tabs to get the stern up.....and hope...
That's the problem I see with these motors. Due to their weight, you pretty much have to design a boat around them. In the big CC class, lets...
They would be michigan federal propellers (28x37.5). I've never heard of Cabo using Acme.
They're all electronic hence the: "• 0-400kHz Default input. Switchable to CAN J1939 input via software tool"
Good luck with that, there is no easy replacement without going to the new VDO ones which are a maze of wiring that has to be added. Try calling...
Their are a lot of innovations, like the 2 speed transmission, gear case turns and not the entire engine, etc. etc. Just can' The problem is....
They're not under the name KUZ or KUS. They don't sell direct anymore, have to go through Lewis/Jerry's or one of the other wholesalers.
WEMA works well for holding tank.
It depended on which gears and which props Cabo used (veem, federal, etc.) All of the old boat tests list the prop size and gear reduction.
Yes and a 450 HP is 690 lbs...... so 3-450 hp (1350HP) = 2070 lbs 2-600hp (1200hp)= 2510 lbs or 4-450HP (1800 HP)= 2760lbs 3-600HP (1800HP)=...
I have zero issues with getting good ONAN service and warranty support. Northern Lights are good and do last a very long time. However they're...
They were factory from the mid/late 70's on. I've seen the same exact ones with a 19" tv/vcr combo on many different Hatteras...... It is a tv...
THIS, it's contaminents on the gelcoat OR the air supply for the spray gun. Generally they are caused by oil or silicone and called fish eyes......
As far as I know Princess/VSC has always used aluminum tanks and usually outsides of Engine room.
Both are long term, well known builders. I've seen it on several new yachts from Europe.....air temp/water temp are much colder than South...
Why not the 44' HTX, they all came with C18s?
It really depends on the size of the boat, the condition of the gelcoat/paint, the style of boat......and whether or not your people are licensed...
The factory props are useless as a guide. Just this year I had to take 2" of pitch out of 2 different 2020 yachts from 2 different manufacturers...
