I delivered an old 60' Trawler down from Hamptons,NY to Stuart,FL and then back up there over a year later in October.......Hull speed was 8.2...
This is the most logical post you've written in a very long time and I agree with all of it. I figure liberty landing would be your first stop....
"Broward County commissioners gave the go-ahead Thursday to allow the annual Fort Lauderdale International Boat Show to take place amid the...
Every once in a while someone comes up with a new product.......that revolutionizes the industry while the big guy sits on their...
Yes, right to the WYE valve. Easy peasy. Mount the flush panel and has a telephone cord/connection. Hook power, water supply and drain hose and...
This, the boat has 8 hours of fuel at cruise a day, you need to fuel each day, even if using the ICW.
Headhunter uses a jet type nozzle to flush/break up and shoot the stuff down the pipe. Raritan has a S/S macerator that is built into the bowl...
I do Charleston to Port St. Lucie in a day and a half........in a 45' EX...... Beaufort,NC to Ft. Laud in 3 days running 8 hours days......:D
I recently had one that I put a new pump on and did the same thing, where the pvc 90 on the bottom of the toilet slid right around with my hand...
They typically smoke A LOT on cold start up. Typically white/grey smoke. It thins out when they get warmed up. But given the price and cost of...
Show management lists the origional layout map. There will be A LOT of boats that will not be at the show. The covid shutdowns ensured that the...
The 396's have nozzles.
I agree with all of this. I would run the Williams 395 for 2 hours every single month (if we weren't using it on a trip) and would use ethanol...
THIS. I would never repair an R-22 unit or put a new compressor unit with a 20 year old air handler. A/C's work as a package or system.
This, they all smoke a lot when cold. They also usually have a decent amount of visible smoke under 1000 rpms also when warmed up. Also...
You can also wet sand it, and clear it with Awlgrip clear. It lasts for several years until it starts to peel.
In short, NO. Dealing with silicone you have to repeat that process several times to ensure there is ZERO silicone left on any surface....so LOTS...
When you fix junk, you still have junk. Your unit is what, 20 years old? REPLACE the entire system, with a new 410 system which is more...
Because it was calm, and slowing down to 9 knots for an hour in order to safely pump the fuel into the main tanks, would've made us get into San...
That's all well and great, but going slow and doing overnight runs in a 1995 43' Viking, I wouldn't know of any paid delivery captain that would...
