A good SF should be able to take far more than the person running it can. Most SF owners can tell you about being in really nasty seas and the...
Try Azimut North America, they might know. If not the Azimut Marine Max dealer in Pompano Beach,FL.
How about calling azimut? They should have the exact prop specs and probably have a set of props in stock.
Stringers move usually fore and aft when the boat is underway, the entire hull is bending and moving, usually breaking bulkhead tabbing but can...
This, at 3 years old REPLACE all of the batteries. They're past their lifespan. You might be able to use an infrared thermometer and check the...
OK, how are they breaking? Have you ever hit anything with them? Do you service them annually? Do you have a diver keeping the props, drives,...
All of the 2 stroke detroits were crude by todays standard, leaking oil, smoke on startup, etc., but the damn things always started up and ran...
The OP is looking for a newer SF. The closest thing in that size/year would be a 57' Bertram, which there's a good chance of the boat self...
Yes. The other wire that goes to the trigger comes off of either there or the compressor unit.
The control pad wiring goes to the air handler itself where there is a board. The air handler has another wire that then goes to the pump relay...
There is only 1 pump trigger board for all of the units, that's what the 4 phone jack cords......1 from each unit.
The main circuit boards are on the units themselves, generally in a metal box. You should also have a pump trigger circuit board that allows each...
Plus the stuff against the plates freezes and the stuff in the middle is half cold when you stuff them with your 100 bottles of beer. Insulate...
I don't know. Naiad usually produces a top shelf product though from my experiences.
No direct experience with the E stabilizers. BUT, the benefits are that the electric ones react quicker and better in a rough sea. And, electric...
I go round and round with this in my head sometimes. Man's are always slightly more economical than CAT's, not much but 3-5% in fuel burn....
Yes, 40' and above it's mounted in the bilge area of the holding tank, usually on the ceiling of the bilge or under the salon flooring just after...
Why are you buffing Awlgrip? You should never buff Awlgrip unless it absolutely needs it. Here in Fort Lauderdale around $3 per foot for a...
It's usually on the top of the blower, near the rear of the blower on Detroits. Follow the shut down cable to it on the engine.
No, I personally know of a set of the 10 cylinder 820's in a 2001 50' Post that has over 6,500 hours and they still run good. The owner had the...
