I like lifeseal myself and use it a lot when I am looking for less than 5200 bonding strength.
The French blocks were on 3126's. Not sure if any 3116s had the same blocks or French blocks at all.
Liam, I am talking of the sub 50 meters. They are launched with a lot of issues and not a lot of quality control with how things like wiring,...
How much fuel do you have onboard?
I'd take a 3116 over a 3208 any day. The 3116's have a lot of torque, burn clean, and aren't susceptible to overheating if you don't clean the...
The HID's have a slightly brighter light. But burned out $75+ bulbs are quite common with them. Chances are you're going to need a $600 ballast...
I agree with Capt Ralph. Verify fuel pressure. Also try removing the air filter and see if that fixes it. I once delivered a Volvo boat that...
How clean is the bottom? It sounds more like a dirty bottom/running gear.
Another issue I've run into with an 8v71 TI was very similar like yours. The raw water pump had a 3" spacer between the pump and the inlet hose....
Get an infrared gun and while running at speed check the inlet and outlet temp of the heat exchangers, check the thermostat housing and see what...
The other main issue are manufacturers and dealers not stocking parts. How hard is it really for large dealers or manufacturers to simply stock...
I had one once....20 years ago....They run good and are durable, but generally leak oil like a sieve. Parts are hard to come by but you can get...
Most likely the 12 volt breaker is for the solenoid on the horn (a valve that simply opens when you press the button). The horn is most likely...
I'd swap it out for a complete new Raritan toilet for about the same money as a rebuilt galley maid motor and never look back!!!!!!!!!!! $800...
Try their website or calling them. What is your issue or what do you need? They are still in business but haven't come up with a new product in...
Have you ever been on a Lazzara when they're trying to get on plane and the amount of vibration they have? I did a seatrial on a 68' where BOTH...
Are you sure it's not a 240 volt water heater? If it is, you will get 120 volt with one lead on the multimeter hooked to ground on either wire,...
Why try it?
Check the smaller coolers. I had an issue like this and it ended up being zincs in the fuel cooler, which was directly after the raw water pump....
It's a Lazzara. Lazzara has always built their boats without enough blade tip to hull clearance as well as putting the underwater exhaust too...
