60 Amp hours is nothing. Sure 2 batteries will have enough cranking amps will have enough ooomph to turn the motor over, but only for about 12...
I had this happen. A set of Covington 12v71's TI's, they used a 1.46" injector height for some unknown reason even though in the DD book for...
These are my feelings, if the bore scope looks good, and they turn WOT and start without smoking I wouldn't do a compression test on Detroits...
I agree with these sentiments. I'm not a fan of the 92's and while the DDECs start and run good, they don't last nearly as long due to their HP...
Does it perform the same with them? WOT RPM and Speed?
I drove across alligator alley today in the middle of it and north, lot of fires and lotssssss of smoke, smoke was headed directly towards...
That IS wholesale pricing. I did a boat with Scandvik about 2 years ago now, 65 lights, all still working perfectly.....the 10 watt equiv was all...
It's coming from I95 bridge, and the airplanes......the prevailing winds are generally SE.
Garmin has an APP as well, but you have to pay for it just like navionics. Navionics is $50 now. Who here prefers the Garmin app over the...
Yeah, no depth finder, no radar, no way to put your autopilot on track to follow a course. Also an external antannae is always going to be more...
Check with Seatow on Hillsboro inlet as that was very shallow in the recent past and you had to hug the green markers 3 and 5, but they recently...
DO NOT go out Boca Inlet, it is too shallow except for maybe right at high tide. The ride over should be safe, but it's not going to be...
2 good ones should provide plenty of light on that size beam.
I've run A LOT of different pod boats..... probably around 40-50 different yachts/boats with them. I've run everything else too Arneson, jets,...
Why is this?
Yup 1900 HP, here is the caterpillar link to the engine...
I've heard that the early 1650hp ones are/did. 2007/2008 . I've heard they've been fine ever since. I've looked at a few yachts in that age...
Cummins also sells marine remanufactured engines which are actually pretty reasonably priced AND come with a nice warranty.
You can use a drill bit to stick between them to determine size.
No 1900 or 1950 hp out of the C32's now, I forget which.
