Not sure about the particular setup on that boat. However, many of the Lazzara models are known for having a lot of cavitation related vibration...
It sounds like your issue is more with Marinemax than Azimut. Cylinder head should be warrantied out by Cummins and not Azimut. Cummins is...
That is true and I agree with you. But the OP stated that Volvo blamed it on the boats transom zinc, not the drives zincs. If the transom zinc...
I ran a 2003 76' Northern Marine, for the factory (it was used, previously owned, not new) and for the subsequent owners. I had the boat out in...
Probably because they just threw way too much fuel in there and slowly washed liners. 140 LPH injectors on a 12v92 are a bit too much and tend to...
Why would a transom zinc, have anything to do with water intrusion on a pod drive? The pods have their own zincs to protect them. TK, the pods...
Care to elaborate on what exactly those issues are/were?
You're going to need to cut pitch by a lot more than that. You were over propped by an inch of pitch with the previous injectors and should have...
What boat are these engines in, what gear reduction? If the boat came with the 12v71's TI's, I would see what props the factory used and go from...
With all due respect that's not how you use the Reverso system. The reverso sytem is used either as a transfer pump/filter to pump and filter the...
No I called Rcrapps a mechanic which he is. Kiwi would best be described as an engineer, although similar roles, but different
With Azimuts, most of the time the problems do stem from something the builder has done. I agree most problems can be handled by finding the...
Not at all. What I am saying is nobody should call out a member who is a mechanic and has a long standing relationship on this board, especially...
6 postings compared to rcrapps 3666 postings and you're coming on here to talk about a BS filter, really???
Usually if you have a good hurricane plan for keeping the boat secure in the water your rates will not double or triple. Usually that plan...
Yeah but the joystick is active anytime the boat is in neutral with Zues, unlike Volvo that a button has to be pushed to activate the joystick....
No, I'm familiar with the factory D.D. starter wiring setup which he described that he has, mounted on the motor.
It's pretty tidy now. The 2 solenoids are mounted right on the motor in an area that is not a problem. What the OP is doing is searching for a...
cruise RPM with your engines should be 1950 rpms. They'll burn around 60 gph for both and it's highly likely the boat will cruise at 20 knots...
