I buy the fluid from Hynautic and it comes in a gallon jug already pre-mixed, you just pour it in. It seems to solve these corrossion issues as I...
Sportfish from my experience tend to defy the standard hull speed rule of efficiency a bit and many times a 55' Sportfish will still be pretty...
It happens in inlets if the inlet is shallow and it's rough...... if you're coming in and at the bottom of an 8' wave, then you are 4' below what...
You have fluid at 75 psi at the helm control, so when you push the lever from neutral to fwd/reverse it assists the pressure you're using to move...
I think the Hynautic uses higher air pressure to actually push the actuators. Hynautic engine controls it's recommended to have 75-85 psi in the...
There is access to that area, there has to be to access the water gauge. It's either going to be through the base of the cabinet directly above...
I'd put Rule 2000's in the engine room, the 3700's seem to airlock a lot easier and stay airlocked and the 2 in the engine room are mounted at...
You cannot calculate hull speed as you have a planing hull or semi-displacement hull. Sportfish usually have a much higher "hull speed" than a...
Really the only thing the pressure does is keep air from entering the hydraulic system. 1 psi of air pressure would work even. Both ways work....
Verrrry interesting. Landed 10:15am, got underway at 2pm, after owner and wife got off, got everything ready, 3 pizzas from the pizzeria etc....
Me either, I call it at a 5' forecast with most all 50' boats. Handle it and more yes, worth breaking stuff and having stuff fall off the walls,...
Volvo D6's are good motors with no inherent problems. They run smooth and pretty clean. However, they have several secondary fuel and several oil...
CAT had some issues with the C15s and I believe discontinued those. However the C18's and C32 ACERTS and non acerts are completely solid motors....
71's were good motors for their day, but I honestly think their day has passed. If they're in the boat you own keep them. BUT, the newer motors...
It's possible. I usually fill the system to 35-40 psi, then when you remove the bicycle fitting you lose a little, then I press down on the...
_2.jpg&contenttype=jpeg "Click for YF Listing Service")