Never used one but head hunter always makes quality products
Most diaphragm pumps like the shurflos can be a little loud depending on how they are installed. The grundfos John suggested is pretty quiet...
When you say gas, do you mean air or is there a smell? what kind of water pump do you have ? If air gets sucked in the pump, it has to be...
That’s indeed going to be a $1M+ project... if you love the boat and intend to keep it for a long long time that’s fine otherwise you really going...
The manufacturer or any good hydraulic tech should be able to add a valve to slow it down. Nautical structure did that to ours a couple of years ago
i had 2” AQ22HS machines by by local prop shop when I repowered my 53 Hatt 3 years ago. I forgot where the stock came from... I also had some 3...
Comes in every diameter
spot on. The 116 I started running a few months ago has a single stage TNT lift which doesn’t raise the platform high enough. When accelerating...
[ATTACH] Make sure it s AQ22HS (high strength). The prop shop should be able to calculate the safety factor for the shaft and make sure it is...
Define flooded... how high did the water go? Salt or fresh? If there was significant amount of water inside, it s almost never worth it
I could be bad or dirty fuel but the filters should handle that. check the fuel pick up as well as the anti siphon valve on the tank. They get...
I agree. It’s likely to be the heat exchanger which is easy to test and replace if needed. If original, 30+ years old. it could also be the...
I always have a spare pump on board. Always. And impeller of course.
When I repowered my 53 Hatteras with C series I had a good prop shop run the numbers and the result was spot on. if your existing props are way...
That could happen but every time I ve had cooling issue there was steam in the exhaust before. And again, it s a clean shut down not the...
A cooling issue doesn’t cause a stumbling and slow shutdown as soon as load is applied. I may be wrong but that’s how he described the symptoms....
Lol. Good point. That said, I ve pretty much always found a way to either not use fenders at my home slip or if I really have to as on a tee...
Hull speed on a 63 is about 9.8 to 9.9kts. At that speed you should burn around 16/18gph (combined) Go 11kts and that will double ... at hull...
Looks like it s the new thing these days, or maybe it s a Miami thing. Driving around with your fenders out flapping in the breeze or dragging in...
Intermittent issues are tough to diagnose but $6k seems a bit high :) what did they do for that kind of money ??? as much as I hate throwing...
