Try hagerty. They have a marine division for wood and classics
No idea about your home waters but here in south Florida most boats get cleaned by a diver once a month, they check and replace zincs too, for $2...
I can't see such a boat run with just a captain and occasional day workers. Unpractical for a whole bunch of reason like the time and energy...
I see Beau mentioned newport RI... It s probably my favorite town on the east coast but one a mooring not at the dock. Marinas are packed, busy,...
I have done the trip from Miami to nantucket and back 4 or 5 years in a row anchoring most of the time with w 70' and 6 1/4 draft. 110' and 8.5...
Couldn't have explained it better I would just add that I always keep a bicycle hand pump on board (unless the boat has a compressor) to top off...
Looks like some converter. Check voltage on input and output terminals and trace teh wiring to see what it does
There is a big difference between the northern and the southern exumas mostly because most boats, especially charter boats out of Nassau, don't...
Having spent so much time and effort along sometimes with bloody knuckles and cramped muscles, I have taken a different approach to the bilge...
The Abacos have more marinas so for those who like to spend a lot of time at the dock with neighbors close by, it's a better option Me I ll take...
I don't care if a wire nut is visible or not, they don't belong on a boat subject to vibrations Wire nuts are designed to work primarily on...
Most insurers will require a survey before they insure the boat... The reason you pay for a survey, especially pre purchase, is for the surveyor...
There has to be a way to run a proper loop instead of relying on a check valve. Adding an above waterline fitting for discharge is really no big...
This is a joke, right? Oh wait... Poster lives in Washington ... Assuming DC and not the state it explains it all :)
Welcome to the banana republic of Miami.... Key biscayne conveniently forgets that their tennis tournament causes a traffic mess on the Miami...
Screws ripping out??? Any harware csrrying any load like cleats, chainplates, chocks, outriggers, etc should be THRU BOLTED WITH BACKING PLATES....
Thanks bill, so hatteras switched to fiberglass on the 58s... Good info Brian, I forgot you have C series on Panacea! Should have remember...
No lift mufflers in the ER but inline mufflers near the stern which may not be needed for the cummins according to cummins guy. I like the...
I m going to let the cummins dealer / installer handle the ER connection One concern with the fiberglass tube is how it is almost a straight run...
I want to keep it simple just a straight tube aft. I was planning to run the tubes out a couple of engines to glass them on both sides, you...
