On your personal boat, your best bet is to go with Tri Lux white on the running gear, the material is not that pricey and it works and lasts...
It could be the gasket where the pump meets the gear. Clean the entire area on the pump and gear and boat with degreaser and paper towels rags,...
I didn't know that. I'm wondering why in all this time, more builders haven't used them.
Yes, you can just push them on by hand, but push hard and twist a little and try to get the hose on in one shot
Being that they're push lock fittings, and it looks like they're attached to solid things, if you're going to re-use the old fittings, it might be...
There's a standard per foot rate here on a monthly contract that most everyone in the industry charges.
I took two different yachts to the Miami Boat Show and had zero issues with Haulover ICW. The water color is so clear there that anyone that can...
If you have cavitation issues and pitting of your propellors, it doesn't matter what you put on them (ceramic coating or prop speed or similar) it...
$500-600k.....It had 16v92's.....so should be able to utilize the same shafts.
I believe the motors were extra, but the $250k included the removal/replacement and gears and all of the other ancillery stuff.
It depends how extensive it is. If you go with similar or the same HP you can keep shafts, props, struts. I saw Jarret Bay repower a 72' Jim...
Fabrica is a very good brand found on most yachts. Try Ronnie's Carpets he only deals in yacht carpeting in Fort Lauderdale,fl
I'd say 10k hours on 396's is rebuild time. I would wait till a failure and yank those smokey, stinky and expensive to maintain engines out and...
Well, stop running it hot before you blow it up. It's most likely the raw water impellor needs to be changed. A lack of water flow can...
Not a problem. I know your delivery is still a few months away. Just let me know.
No idea, I've never seen any yard use any gel. Was it blue? If so it could have been FSR but that stuff is pretty mild I think. All of the...
I am no fan of jet tenders, and would go outboard anytime I could. But, the old Nautica's with the yamaha 2 stroke waverunner motor were total...
US's EPA regulations on diesel cars and trucks are very harsh and I believe the diesels have to meet higher mandates here than in Europe. Look at...
The Easiest way is to hire a professional. 3M makes good compounds, you're going to have to find what grit works and then work your way finer,...
I would stick with the same diameter you had, to work the math you also need your gear reduction......you also NEED your current pitch. Then just...
