Something sounds like the governor in the stbd engine might be hanging up or binding at that rpm point. You're getting closer on RPMs, 29x29 3...
YES, do not do it. Think of a zinc as a ground. Over zincing it will cause some metals to degrade as well.
Try Norcold. If you just need a face plate go to your local plastics place and have them cut you one out of any material you wish. I use...
My mention of vibration etc. refers to all of the NON IPS lazarra's. I survey seatrialed one 68' that the vibration was so bad, both hull and...
Try the 4 blades!!!!!!!!!. 29x29" 4 blades are closer to what you're looking for and probably equivalent to 29x30" 3 blades. But a good prop...
I don't know how you're getting that info. I really think your actual weight measurement is really off that you're plugging into the Formula....
What brand of refrigerator???? Age of refrigerator? Is it compressor noise or fan noise. I would start by looking at both of those items and...
Not sure about the particular setup on that boat. However, many of the Lazzara models are known for having a lot of cavitation related vibration...
It sounds like your issue is more with Marinemax than Azimut. Cylinder head should be warrantied out by Cummins and not Azimut. Cummins is...
That is true and I agree with you. But the OP stated that Volvo blamed it on the boats transom zinc, not the drives zincs. If the transom zinc...
I ran a 2003 76' Northern Marine, for the factory (it was used, previously owned, not new) and for the subsequent owners. I had the boat out in...
Probably because they just threw way too much fuel in there and slowly washed liners. 140 LPH injectors on a 12v92 are a bit too much and tend to...
Why would a transom zinc, have anything to do with water intrusion on a pod drive? The pods have their own zincs to protect them. TK, the pods...
Care to elaborate on what exactly those issues are/were?
You're going to need to cut pitch by a lot more than that. You were over propped by an inch of pitch with the previous injectors and should have...
What boat are these engines in, what gear reduction? If the boat came with the 12v71's TI's, I would see what props the factory used and go from...
With all due respect that's not how you use the Reverso system. The reverso sytem is used either as a transfer pump/filter to pump and filter the...
No I called Rcrapps a mechanic which he is. Kiwi would best be described as an engineer, although similar roles, but different
With Azimuts, most of the time the problems do stem from something the builder has done. I agree most problems can be handled by finding the...
