Aren't there lots of 36 volt battery chargers for golf carts? Not exactly Marine. but a battery charger none-the-less
Slow down to hull speed, say 7 knots and you could increase your range to probably 1000 NM's. Take a look at 43'/44' Lagoon power cats as they...
RCRAPPS= The big question is how old are those rudder and shaft zincs? If they are only a month or two old, you've got electrolysis going on and...
The difference between 300 or 315 and 330hp is larger injectors, 330hp to 370hp is a larger turbo and aftercooled and possibly larger injectors I...
Watermakers are not standard and quite honestly for my customers on yachts 70'< I don't even recommend them unless they like to anchor for more...
It sounds to me like you're looking at an East Bay? The cruise numbers sound accurate as does the anchor size for that size boat.
You also have to get it home from Lake Michigan. I wouldn't recommend going over your budget as you're going to spend a good chunk of change on...
Yes, and the RAZ toilets from my experiences are never 100% rebuilt.....
What's your price range? Neptunus builds a good overall boat with a good ride. I would say a 52',55' or 58' late model Searay sedan bridge would...
Hours are a bit low for the year, generally you'd like to see 100 hours a year, but I change my opinion for boats that are winterized and in...
Majilite is what most manufacturers are using.
Have you checked your Sentry charger to make sure it doesn't have a bad diode and is leaking AC voltage to the batteries?
I could rebuild an engine as well with a book with the torque specs in it, etc. etc. Measuring tolerances and torqueing bolts isn't anything that...
Perhaps you should post about your large generators in your own post and not in a post titled "Engine ???" and about an initial post asking about...
The OP asked about a generator on a 56' Neptunus, the title of the thread is about a 56' Neptunus, if you read it. The title of the sight is...
All WONDERFUL generators, but NOTHING that you're going to find in a 56' Neptunus MY and chances are the weight of the generators you guys have...
What size do you consider big? Of course the generators I start will take a load right after starting them and are fully operational, but why do...
Generally they do not have a pre-oiler or start at low rpm. I always let them run a good 5-10 minutes before putting a load on them.
Rip it out, you can buy the vinyl with the thin foam backing already part of the vinyl. Clean hull with a good solvent, then spray 3m spray...
With an electric motor I think it will only turn so many rpms period and not hurt it without a load. Not sure. It could still be the cutlass...
