I would NOT do this until right in front of his home port in case anything does let go, no sense putting that added stress on everything that far...
I agree, you are not going to get in your holding tank and clean it, nor should you need to. The raritan additive is a good option. Another...
Wastegates are fine...... 25/26 lbs of boost is what you should be seeing....You're just heavy with the tender....why come back with full water?
They shouldn't. The Keyway keeps the props locked to the shaft so they can't turn except with the shaft.
It depends on what gauge you have and what ohms it reads. Why not buy the gauge manufacturers sending unit, they're not that expensive?
No, they were pretty good boats with very good gelcoat if taken care of. I would definately stay away from GAS ones.
Does it have a sender on the exhaust manifold *(temp?). Does it have an auto shutdown for a fire system? I would check for a burnt or bad wire....
What brand of autopilot? Check the steering system and make sure their is fluid and pressure first. Then go into the menu and try turning up the...
I agree with CaptPkilbride, but at the same token doing it once a year might not shorten their life that much. I would also try 1950 with the...
As a bonus, he can do 1/2 of the Great Loop to get it home instead of trucking it. Striker looks like a very nice boat, how it ended up in MI is...
There's also one in Marathon with twin cummins for around $98k. I think I'd rather have twins but have a friend that has been running an open one...
Check out the island hopper 30'. It too meets what you're looking for and is designed to carry the weight whereas the Albin is not. They're...
I think you can do much better than a 28 Albin for what you're price range is. The Albin is just way too small. Load it up with 4 guys and 4-8...
What's your price range?
I still think everythings fine and you just were overloaded.
It's true, it's much cheaper but he has been researching re-powering and talking about it for a while now and really wanted to re-power.
If you major them, you won't end up repowering for a long time. If you REALLY want to repower, I would just do it rather than major one. It's a...
With the price increase in Aluminum between 2007 and now, they might be able to scrap them and get all of their cost back. LOLOL
Normally there is something on the bulkhead that it is attached to, the windlass bolt might be too close to the hause pipe and cause it to bind....
