Cskip, what capacity in GPM is the low pressure pump and the high pressure pump. I'm willing to bet you could put larger membranes to put out 50...
I recommend 1200 GPD watermakers for 60' MY's and SF. Think about this, 900 GPD is only 37.5 gallons per hour. If you have a 200-300 gallon...
I own a Yacht Management Business and have a love/hate relationship with Azimuts. Parts can be hard to source, quality is average, many things...
I would use the built in transformers if you have low voltage. It is a lot better on everything electrical to have proper voltage. The...
On your engines, it would either be on the plate that you access the controls with. Or, a seperate switch, usually a rocker switch that you can...
If you jumpered the wires at the sender and the gauge then goes to full when power is turned on. Either your fuel/water/etc tank is completely...
Yeah, but usually when you see 208Volts, it's 3 phase electricity that's split up and it's really not good to do that. Didn't you guys buy a...
On yachts the size that NYCAP is running, or even 80' and under. The generator on most yachts makes a lot of noise, heat and vibration inside the...
The DDEC systems have always been very reliable from what I have seen. They're a good system and pretty much what MTU is still using today. In...
If they do eventually prime and run and stay running for hours with a load. It's not air in the lines to the injectors from the initial bleeding....
Another option, and not the best one. Would be to get a piece of Shedule 80 PVC that will fit over it somewhat snugly and slice part of the side...
The 68' Predator is really a 2 person boat to operate. Visibility is really tough from the helm of that boat to see the stern (you can't) and the...
No, trolling valves are never meant for docking and going in and out of gear a lot. They will go into gear with variable delays and never ever be...
Most likely. It definately is a sunseeker and is smaller than the 63'
