Try calling Environmental Marine in Fort Lauderdale. They have been a Sealand/Dometic dealer for a long time and may be able to sell just the...
I have never ever run an Offshore. But it seems that every owner I know that has one raves about both the ride and the build quality. One owner...
200 hours is a much more reasonable number, but since it's due every year or 400 hours, whichever comes first. I haven't seen any yacht I've...
I have run a set of those for several years now. They're good engines, and figure 85GPH for both at 80% load. They don't have as much torque as...
If you own the vessel and it is your private vessel not being used for carrying paying passangers or anything commercial then it should be no...
I would never advise that someone retrofits one. It's just another system that could create lots of problems and headaches. Traditional water...
Also, never add bleach to a holding tank system. It will eat any rubber seals you may have, may also cause the holding tank hoses to allow smell...
LOLOL. Have you ever ridden or run a Broward in a following sea? Also Many Browards were extended, one that I ran was extended 3 different...
And many times the leak is in the coils and the coils are sandwiched inside the fridge and you can't get to them. Once in a while you get lucky.
Adding engine room strainers, IE Perko's or Groco's on top of the grate type strainers really helps sand to drop out of the raw water into them if...
You could try that, but mold assembly will be frozen to the side and to the coils and I would really hesitate to do that as I would think you'd...
50-55' is a little big for your first boat IMO. I would recommend bare boat chartering a few yachts and different styles to get an idea of the...
YES, you need to evacuate the system, replace the ice maker mold then re-charge. If you don't the coils all expand and you cannot get the new...
NYCAP has good advice and I too echo looking for quality. You really need to figure out how fast you really want to go, and what activities you...
What about just plumbing it and using bilge blowers to circulate air in their?
I agree that you can't lean against an angled bow rail for comfort, but most cases you can lean/ brace yourself against it for docking purposes....
Well you did want to monitor temp of the engine room right? Well the bilge water temp will ummmm get you that temp, just maybe delayed a...
HTM- that makes a lot of sense. Keep it less accessable to get any valuables and small items off first. I'm sure there is still a lot of...
You won't get a readout for temperature because it's not submersed in water. That was a transom mount transducer and is why it has that integral...
If EVERYONE in the U.S. simply paid a 10% tax on everything, we'd be a lot better off both financially and hassle wise than with the current...
