Searay like any builder has had some issues but it's a small percentage of issues compared to the amount of boats they build(like any builder)....
Places can rebuild the electrical end if yours is intact.
I have managed/maintained many older searays and currently manage/maintain 2-50' Searays a 1991 and a 1998 and they both have held up...
Bertram is located in Cocoa Beach/Merritt Island FLORIDA, USA
A 54' Bertram is far too wide, long, and heavy to be trucked.
If there is too much air pressure, the expansion tank cap allows it to disappate and keep it at the maximum pressure that it is made for 0.9 bars?...
There's no other way, besides shipping it on a freighter or running it on it's own bottom. When you factor in the price of the shipping and...
Every single time you open the cap on the resevoir, you should pump up the expansion tank with air, or there is a good possibility that this alarm...
What would you like to know? The 54' was a much better riding hull.......the early 58's would lean over and ride on the side of the chines, they...
Did you remove the cap and check coolant level? If you did, there should be a small shrader valve, that you should put an air pump and pump it up...
It's possible to have your 32 volt starters and alternators rebuilt to 24 volts by changing the windings and voltage regulators on them, I believe.
She is coming out beautiful. You're doing an amazing job on her. How are you going to keep the varnish on the house nice, with having to clean...
Reliabilt injectors.....or as good as the old and used ones you took out. They went through a phase around 2006-2010 were they were really bad....
Blow a little compressed air into the dipstick tube, it is likely clogged with Algae or sediment.
You have surrender them at both places. You also have to pick them up at the same ports. Be prepared for a long wait to pick them up......
You're right, All of the small ones I've caught (under 150lbs) were the ones that jumped quite a bit. With all of the bigger ones, I've never had...
Not to mention it's really easy to do. Just put the prop on with valve grinding compound without the keyway on the shaft, put the nut on most of...
They definately had 110 injectors, not 90's. 90's are a real good injector in the 8v71TI's instead of the 110's. They run incredibly clean and...
On a wood, aluminum, or steel yacht, I'd recommend annually. On Fiberglass many do it annually, I stretch it to 18 months on a lot of them....
