I just took fuel yesterday of about 2000 gallons and the price was 3.41 for a truck in fort lauderdale.
That's part of a naval architects job is to marry HP with hull size/weight/and design. However, sometimes the builder will build the boat heavier...
At the dock, it's mostly always an electrical fire. Underway, it could be an engine room fire or electrical. But most boats tend to burn down at...
They're both good engines and will go a very long time if properly cared for. The 3208's weak point is the cooling system is not overbuilt....
If the bottom is dirty then that definately is the problem. Also make sure fuel filters are clean/new both primary and secondaries. If that's...
There is definately 2 feet between the 4 and 6 and also 2 feet between the 6 and 8 in that picture. It is accurate, but it looks decieving in the...
In the first picture, the numbers refer to the draft of the vessel at the bow. The second picture is the load line. The vessel shouldn't be...
Call them on the phone and ask them. 242-326-4401 or 325-6551. I've transited through, stopped for fuel and cleared customs. The officers asked...
You have to check in within 24 or 48 hours from entering their waters, so you could anchor one night then check in within that window, but look on...
Handcuffs???? :rolleyes:
5200 or lifeseal. Most are using lifeseal from what i know.
With an 84' to push, you're really going to need de-rated 12 cylinders for the torque factor or large 6's. I forget the CAT model designation but...
What Pascal said, but the outriggers extend out at a 45 degree angle from the boat (vertical angle) or more. You also typically can run 2 or 3...
You only have to clear customs immediately upon entering Bahamian waters if you want to fish in their waters. If you anchor you can check in the...
Excellence III has a really nice paint job on the hull. Cakewalk on the other hand has grapefruit peel and no luster.
Every boat I've encountered with the black Sikaflex around the windows, always rubbed off on chamois and people's clothes when they rubbed against...
Yeah, except the only problem for a lot of people is they can do major overhauls on their existing diesels for 1/3- 1/2 the price of changing them...
The British term for what we call open end wrenches.
Yeah, the glass is see through until you turn the light switch on, then it instally frosts. It's neat and I've seen it used on a few land based...
I've used them all and prefer the LifeSeal. I also dislike 5200 as it yellows and molds quickly and is a bear to ttake off. It has it's place...
