I've run it many times and never had an issue and never noticed concerning shallower depths. I think the shallowest I ever saw was about 9'....
Do you have pictures of the electric motor and the make/model? I too don't think it would hurt it at low speeds. If you did, it would be...
Actually in the real world, with a C9 propped to achieve it's 2500rpm top end. At 1750rpm's you will usually see around 67% load. At 2250 rpm's...
Actually running most engines at 70% load, on 1 engine when the engine is propped to achieve lets say 2500 rpm's at 100% throttle/ 100% load using...
I know exactly the product you are looking to buy, have used it before on two vessels, and do not trust it and would not trust it. Period. I...
Have you verified engine temperature with an infra-red heat gauge? Could the engine intakes possibly be sucking air at this speed due to hull...
That's correct. They were and are very sensative to low voltage or voltage spikes and do crazy things when that happens. Also make sure to keep...
Have you had a reputable diver cleaning the bottom? If the propellors are heavily covered with barnacles, the engines could be really straining...
Google is your best friend. Microcommanders are a set of electronic engine controls that were installed in a lot of yachts and very prevelant in...
I didn't install it, however it is connected into the microcommander system to make it shift foward and reverse and such. The yacht controller...
You should never be operating a yacht that size single handed. Period. You can pay for a lot of mates with $13,000 and have a much safer...
I quote them in the metric rating because that is how the manufacturer rates them, and advertises them. No, the first 150 sets of C32's were...
I could careless about running a boat with journalists on board or any guests for that matter and prefer a straight delivery.......and could...
I would NEVER use a remote control docking system that is non-corded. Yacht controller was installed on a 70' azimut I ran with microcommanders,...
They're both good boats depending on what you're looking for. If you're halfway mechanically adept, I wouldn't worry about the age of the Hatt....
He's talking about using it for washing the boat via a hose directly from the softener and they work well for that. I would never use a...
The E-rated C18's are rated at 1015 MHP and have been for almost a decade they've been out and 1150 MHP in the recent acert version according to...
Huh????
They help considerably, however you must backflush them every 500-1000 gallons or they stop producing soft water.
Buy the flex connection and both clamps, and keep them on-board. They go often in that configeration and almost always seem to go on a trip where...
