Yes the Scandvik's have the chips as part of the bulb. I haven't had any issues with them dimming from candle light brightness to fully lit....
I'm pretty sure on Pre - C series Cats that the fuel burn is calculated off of a base fuel map, that takes into account injector pulse, load, and...
No, I carry 4 lithium batteries for a phantom 4 drone on one boat, and 2 seabobs on another boat. The biggest issue with lithium is when charging...
Sunseeker. Possibly Maritimo or Riviera or even an Azimut. I think you really need to figure out if you want a SF or FB MY. Consider your usage...
I ran a 146' Breaux Brothers yacht before. Chances are there is a fuse on the start circuit, probably in the engine room that is blown. Possibly...
I have no issues with dimming 24V LED's. All of the ones I have used DIM fine. I converted an entire boat to LED with 65 LEDs (scandvik wafers...
WHat type of yacht do you have? What Brand. Are the engine mounted keys off when you are trying to start them from the wheel house? There might...
I too prefer either Chevron or Mobil oil for the old DD's. I too have noticed that Rotella drops a lot of oil pressure (hot) and consumption goes...
These 3406's calculated fuel burn off of a basic map based on ,RPM, injector pulse, and load. Chances are the old props might have been a little...
Aside from the 48', Burger builds on order. So if anyone wanted a yacht with the old lines, they would have ordered one, but nobody has.
The entire problem with Burger is that they've been trying to build Aluminum boats for way too long in a size range and era that wants fiberglass....
He's looking for 2300 rpm's loaded. Motors are doing 1415 and 2370 with no load. I would verify the tachs are correct.
I would replace the hoses as they are old age wise and are they going to last another 10-15 years, and I would do exhaust risers for both engines....
I would've taken out more pitch and would've wanted to be closer to 2350 than 2300. They took out less than an inch. Usually it's an inch of...
Patch them and use them for target practice......or floats for when you're swimming......LOL
I have had excellent performance from the Taylor brand of the RIB material fenders. Taylor calls them superyacht fenders. I wouldn't hesitate to...
Westerbekes were very popular in the 90's. But several of their issues, caused them to be very disliked. Some models the heat exchanger is part...
Jabsco does make a continuous duty blower with a 5,000 hour motor life rating. BUT, I don't think they make it in 32 volts. 35770-0092 (12 volt)...
Probably not, the inflatable fenders take a ton of abuse (a lot more than RIBS) and will probably blow the seams you repaired. You could try...
I've had the same issue on a 2007 Kohler 12 EFOZD for the past 7 years. We've replaced fuel lines, fuel pump, circuit board, and many other things...
