See my previous post.
I ve been using cheap remote / relays for years for hydraulic swim platforms, anchor windlass or TV lifts.
With a little luck the government will have their website updated in a few weeks. the association of Bahamas marina has always posted updated...
More proof that AI should be labeled NSIAI for not so intelligent AI why even rely on such crap when the info can be found on the official...
When I repowered my 53 Hatteras the Cummins dealer had a good local prop shop run the numbers. Their results were spot on.
I seriously doubt this is an aprils fool as it was posted by Peter Maury, ABM President.
I agree with Ralph. Start with the cables at the starter incl ground cable to block. If that fails I woudl test the starter itself
Sold.
The problem is that some fittings are very hard reach as the hose going to the horn runs behind the chillers in the ER then behind salon cabinetry...
Trying to find a way to find a leak in our compressed air system. Air compressor runs fine and builds pressure in the tank but once the tank...
Excellent condition, great holding power, good for up to 55/60’. Easily disassembled for storage if used as back up. Retails for about $1000...
And other one bites the dust…. I switched to the stand by pump while in the Exumas a couple of weeks ago and finally got to replace the one that...
I use Cmap chips on the Simrads on my 53 as well as on the office’s dinghy. Good details
I never use a stern anchor, never in 20 years anchoring for weeks every year in the Exumas. Just not worth the trouble. If the wind picks up...
A good chunk of the job is labor and whether the boat is 25’ or 45’ or the thruster 2 or 12 hp, the labor will be pretty much the same. If...
I woudl wait and measure. I ve had shafts replaced after we found cracks and the local prop shop was able to make new ones in about a week....
As if dedicated remote controls weren’t bad enough… someone just had to come up with a phone based remote control for docking and is marketing it...
Only one 100 footer at compass two days ago and four 60-80 footers. only two 100 footers at Staniel today and a couple of 60-80 footers. only...
I m now pretty sure it was the pilot house control that was causing the issue. I removed both aft deck controls and while it ran fine on the...
Ran for 3 hours today without issues except of course a bunch of errors on start up since two control heads are removed. Not calling it a victory...
