I "exercise" my valves almost every weekend all work realatively smoothly but the raw water intake for both engines are stiff. They are larger...
Any input on your rpm issue? I don't have my code book handy on the diagnostic code but did that fix your problem? I have same engine and no...
I have been considering this flooring project as well. My concern is loosing some of the sound insulation that carpet & pad give. Did going to...
You may be right. The testing data does show carpet and pad, even cheap c&p to be a very efficient insulator of sound. The testing I saw was...
Thanks for tips. Will try turning ignition on and testing This also makes sense as I do not remember returning them to fully retracted after...
Quick operational question.... While operating boat tt are clearly working. When at the dock with engines off, tabs do not seem to respond....
I have used naval jelly for rust stains. Very effective. The size of your spot may need afew applications.
Final got mine out. It is a Rule 2000 as Rich thought. So as you suggest NYCAP, as the boat sits idle, would the lowest bilge be aft or...
Not sure what brand. Guess I'm going to remove it first, then see what I have. Thanks foe input.
Replacing original 14 yr old pumps. does anyone know the output hose size? Didn't get a chance to pull one this weekend And related......
Alright I have a multi tester. Not real sure how to use it. Guess it is time to learn. Will give it a try this weekend. Thanks again for the help
The receptacle has two leads. Hot and ground I assume. Both are connected and When tested with 12 volt tester it lights up so it is functioning...
Ok, I give up... I need the DC power outlets to work at both the bridge and pilothouse and I am having difficulty. First of all, there is...
I am also a new owner of these larger boats and still learning. But I do know a couple of things about floors. In my 450 Voyager the carpet is...
Thanks for replies. Rancor filters were pretty dirty. Fuel in tank and collected fuel during the bleeding process looks good and clean. We...
Getting ready for our first fill up with our new 450 Voyager. These are my first marine diesels so not sure what, if any additives I should be...
I tried to inspect behind the air intake before taking more things apart. Never clearly found the drain line. I tried to access the backside of...
Thank you, I will check them out. Jerry
One of my running lights has burned out. Not surprised as they have been sitting idle for so long. So is there a led substitute that would...
Thanks Monepit. I had seen that access but had not opened it yet. Will check it out Jerry
