On our Sitex AP there is a setting that displays rudder position. If your AP can do that then slowly turn the wheel and see if the display is...
Battery monitor, wouldn't leave home without one. We have a Magnum, ties right in with the existing control panel. Just have to install the shunt...
We fixed ours by taking it to the dump. Water all over the floor one too many times. Bob
I agree completely, if the engines are running why not use them to charge the house bank. There is probably very little charging required for the...
Certainly not a "one car only" but not that bad as a DIY. Lot's less stuff available than for a 911 but a fantastic road car. Bob
Don't know about the boat, but I love the car. Bob
Put one of the Elegance heads in the aft head. Love it, super quiet. We bought the fresh/raw water unit. In the marina use fresh water, when...
I'm with Capt Fred, a bad connection somewhere. It shows 12V with a voltmeter which draws almost no current but with any kind of load the loose...
We have a similar problem. I have found sources for the felt channels but have not been able to figure out how to get the windows out. I had hoped...
Lowes or Home Depot? Worked on our boat. Bob
Our DC panel has a selector switch to monitor several battery banks. One of the positions is OFF, with no reading on the DC volt meter. Bob
Maybe he's looking at the AC volt meter? Bob
Maybe NO batteries? Bob
If it's a bayonet socket then it will most likely be a 1156, a common 12 Volt automotive bulb. Bob
One more thought. I think they are turbine sensors, a little wheel that spins. Blowing compressed air through them may not be the best idea. It...
Have you contacted Floscan tech support? They have been very responsive when I have contacted them. Usually reply the same day. Bob
