I hate it......always have hated the Bertram SF's.....that's the bust your behind step when coming back from the bow.........then if you didn't do...
3/4" there is plenty of heavy duty sanitation hose.....it's the 2 3/8" that's the issue. Shields sanitation hose lewis figure 1984 comes in 3/4",...
I think it was 3/4" but I honestly cannot remember. Shields does make hose in the 2 3/8" size that is approved for sanitation The series 146 hose...
Did you purchase a Glenndenning or Marinco shorecord or did you make it? It sounds like the boat either needs to have 2 30amp shorepower cords...
Both of those are very good as well. I just have found the Sealand to be the best ones.....Sealand isn't marketed as well as Raritan, Raritan...
Given the complete lack of information, it sounds like you have 240 volt shorepower and are only getting 1 out of 2 legs so 120volts on one...
They had some valve issues, soft metal. Just make sure the valves were changed in the heads. Not sure the era the heads had issues, but were...
Sealand sanitation hose is the best stuff by far.
No, I have a customer with 6000 hours on Man 820's that have never been majored......both motors should go 5-6000 hours.
You need a lot more pressure to get any volume. Watermakers operate at 700-850psi. Usually 800-850 psi. Yes, you can make one yourself, but...
Try wetting the plate with saliva and see if you can read it. If not scrape the paint off the plate, and see if you can read it. If not, mark the...
Well it depends, the OP has a 16 knot boat, so in the Carolina's and GA running outside to safe water and back in is so far, could mean less...
