Thank you for the information. I enjoyed reading about the history. You might do well starting a little business fixing the cpu's.
I wouldn't. They are not splined like an outboard propellor, so they're just relying on the mating surface between the hub and the shaft to keep...
I ran a 34' Luhrs FB that someone put a wind generator on and it didn't seem to effect the boat too much. It was mounted directly above the hardtop.
Don't forget Cummins, they're a good motor with a good service and parts network.
I think the old Danforths hook better than a plow myself. The only disadvantage Danforths have is they tend to get stuck in rocks and very...
LOLOLOL I agree, but I think LSD was the drug of choice for Janis Japlin when driving that car!
I thought Sturdy was the manufacturer of the engine controls (not the engine computer)? I just had all that stuff shipped back and forth to...
You're missing the point. The garbage truck sees MUCH less load between idle, throttling up, slowing down, because it is in such a low gear. The...
I think with this fixed, if you can get the water out this time, your fuel problems should be fixed and you shouldn't have to install the...
On the car I described the tires would just spin if you gave it full throttle instantly at anything under 90 mph on the street, very similar to...
I agree with this as well. But the difference is, are you looking for best fuel efficiency and travelling at slower speeds (11.4 knot cruise)...
The Fortress are ok as a stern anchor if you go with one larger than recommended and have chain behind them . I bought one for a 64' Hatteras...
Technically you're not chopping the throttles on a race boat after the prop is already unloaded, you bring them back enough to keep RPM's within...
This would be my preferred setup but I'd like more rope behind the chain 150'-200'. I'm not a fan of the floating Fortress anchors (so light...
I believe he is referring to fast acceleration and fast deceleration.
Captain Wampler can do it all for you.
Everything leads me to believe that everything is normal. If you were getting a station wagon effect and had everything closed on the bridge, it...
No need to do either, just look at your inlet air pressure readout and usually it should be under -5, if it's high like -7 or more, you have a...
You can cruise the east coast but are limited by draft and size as to locations and anchoring. Why would you want to work so hard, hire people...
How did the numbers compare on a twin IPS 900/950 installation versus 3- IPS 600's? Weight, cruise speed, fuel burn? What speed are you getting...
