Nope, there's generally 3% of hold back....but the manufacturer only foots the bills for so many days for free (90 I think) and then the dealer...
If you jump them from another battery for 30 seconds the inverter will kick on and charge. You can also hook up a portable 12 volt battery...
What about a 90' Sailboat with a giant sail up, they don't tip over. Look at how much wind force a 90' Schooner could capture and not roll over....
Just replace them, because if they break off it takes a lot of time to get them out of the system and isn't worth the hassle
Have you seen pictures of most of the latest cruise ships out of the water? They make the N M look totally sea worthy, yet you never hear of a...
Because when you tie it not to the bow cleat, but your first cleat back it keeps the boat at an angle of maybe 20-30 degrees to the anchor and the...
You could easily fly to and from the boat and just leave it in places and do different legs as time permits. The Manhatten to Oswego run is...
The problem is the design of the current racing boats are so far removed from a normal sailboat that you really cannot even relate the two....
Be very careful with an Aluminum boat as nothing metallic, such as steel can stay in contact with the Aluminum.....especially the hull.
That's the place. The dockmaster and people there were really nice. I stayed on the T dock, current is a little strong but was no problem bow...
I do the same but use double braid, (hey it looks nicer), and I tie it off to the 1st spring line cleat just aft of the bow cleat, which keeps the...
Well, recommended scope for chain is 3x the depth, recommended scope for rope is 7x the water depth (I and many like to use more than that if...
The Mold assembly is bad......just change the whole mold assembly.....if you shut them off with ice, water, or humidity inside the mechanism will...
I cannot speak for other Northern Marines. But can speak for the 76' that is pictured in their ad on this forum. I ran that boat for the factory...
Yes, it was being towed up the New River in reverse and the transom door was open, which was only about 6" above the waterline height. I was at...
All of these are good suggestions, I also like a large pair of water pump pliers as well......I like the Large Craftsman kit in the plastic tool...
Both are links to fuel consumption at various RPM's...... you probably want the second link. The first link is up to 205hp. The second link is up...
Look up ANY fuel flow chart for your HP of 3116's. As long as yours achieve rated speed at WOT, the boat should burn almost the same as the chart...
Of the 3 mentioned. Delta would be the closest fit when it comes to how the boats are built and finished out.....
I too have seen many people spend half of the price of a new generator fixing some old POS that was well worn out 10 years ago. Only to get it...
.jpg&contenttype=jpeg "Click for Abeking")