I'm not too familiar with what brand of Kayaks are better than others. However I see a lot of yachts your size have brackets or cradles made and...
Which brings about the point of why have them in the first place. The TI's are a much better engine. It's like the short life of the 92...
I would recommend getting the parts book diagrahm from D.D. for 671 TI's and changing all of the parts that are different. Or finding donor...
Everybody worried about Y2K, and nothing really happened......So everyone worried about nothing.
If you have to worry about bugging out, you might as well not live. It's such a ridiculous thing to worry about, and I don't think you could...
The 50C cockpit is 125 sq feet......that extra 2' does wonders for being able to fit a fighting chair. The width is the same, the extra 2' is in...
Gas inboard parts like zincs are cheap. On a typical survey, you'll do a compression check, run them at cruise speed and check all 4 exhaust...
I wouldn't trust a hydraulic system from 1986 unless I physically inspected it and knew it's history, as well as when the last time the pump was...
If the pedal assembly goes too far and hangs up, it's in the pedal assembly and that's where your leak is. The rod gets bent when it's pressed...
I only seem to get about 3 years out of my Ford Expedition batteries down here in South Florida. The summer heat takes it's toll on them, as well...
The rules come with a s/s strainer that is inside of the pump base, you need to clean that often, or just take the thing out.
Do you flush the watermaker every 2 weeks? Is your carbon/charcoal freshwater flush filter changed frequently (every 3-4 months)?
No, the boat is propped with the intentions of running both motors. Running one is going to overload the single motor and make it live a short...
We have a stainless steel craftsman on the Sunseeker I manage which is sturdy, the drawers lock (with a key) so they don't open when you're in...
I hate them with a passion. Every yacht I've ever managed with gas inboards with the exception of a few has been a problem child. Several of...
I generally see in the neighborhood of 2550 ppm of salt on startup and after a few minutes you should see 500 ppm or less. Most watermakers will...
I've had to replace those switches before and have had them go bad. Given the year of your vessel it's probably about time to change the switch....
Brian, Assuming that both sets of inboards are freshwater cooled. On the Crusaders the risers are raw water cooled and only those have to be...
I would say 1500 hours is a reasonable number for gas inboards. BUT, I've seen many many of them die under 500hours because a lot of gas inboard...
I'm not very familiar with 4-71's, but 6-71 TIs make 485hp....divide that by 6 cylinders and it's 81hp a cylinder.....multiply by 4 and it seems...
