I have seen very very few AWAB hose clamps fail in all of my years. They are a very very good hose clamp......ABA is close as well..... but both...
Also, the best thing for a radar is to run it as much as possible. The Magnetron is only recharged when the radar is actually running, and...
It depends on the length of the run. The longer the length, the more difference that 1/8" will make. Over a 3' run, probably a proofteenth of a...
Actually, that's only part of the problem. I have a customer that has and had a beachfront house there that lived there full time until this year...
I've seen it both ways, depending on the size of the hull vent openings. Europeans like to use 1 in and 1 out, mostly from what I've seen....
Why add another part/fitting into the equation and another thing that could cause a problem when the correct size hose is easy enough to come by...
For this and as a backup, but if I have 2 radars, I run 2 different ranges and also compare signals between the 2.
St. Maarten, nice beaches, relatively safe, good food, casino's and things to do, shopping, pretty, and well safe......A lot of my other choices,...
That is correct. If you are making proper fuel pressure at the motor, then you don't have a supply issue on anything between the tanks and the...
I would not do it. The larger flange will push the wire through the hose because of the extra force put on the smaller hose and it will...
Maybe the French Navy took it out, as a sign to the others who are trying to take their wealth out of France since the higher tax rates! LOL
I would've used a 1/4" Aluminum plate with 5200 on it as a backing plate. Plywood will work for a little while, but it's quite likely the washers...
For the most part the salary ranges are ok. The freelance daily captain rate is WAY TOO LOW. I also see a few others that are too low, such as...
Also, try removing the fuel fill cap while you are losing rpm's, it could be that you have a blocked fuel vent hose and after running for a little...
Or even non-Floridians. I have a customer from Michigan and they started a Florida LLC just for the boat and flagged the boat in Florida.
I stayed there 1 night in November and had the same exact feeling about the place. There is a restaurant there, but it's a 1/2 mile walk from the...
Yes, Florida sales tax on yachts is limited to a maximum amount of $18,000.00. It's capped at $300k x 6%
Yes. I have used Bluewater Chairs in Fort Lauderdale. They will make a custom teak table in any size and type that you'd like, their quality is...
Why not make the fins out of aluminum and just weld them right to the hull rather than use dis-similar metals? You might want to put zincs on them.
