Bell canada offers satellite tv and a lot of canadian boats use it. You need to change the LNB in the dish. I have a bell canada lnb if you need...
Check the air filters also, try running without them if they won't suck up debris......I ran a boat with Volvo's one time that some less than...
At his stated speed of 11 knots, that's about 14 hours. Not including any slowdowns for passing boats or a bridge. That can make for a very long...
Since you stated that the overheating issue started occuring since a trip to Key West. It might be possible that some of that fine sea-grass that...
No because it is designed to see 70% load at a much higher rpm, than it is currently seeing on 1 engine that matches it's torque/hp curve. The...
I disagree with some points. If an engine is designed to achieve 2500 rpms at full throttle/load in a twin engine installation. If you run the...
I agree, I would take the ICW with that scenario regarding the boat size and speed. While we're on the subject, has anyone taken Pamlico...
32 volts is no big deal really. Most parts can still be found new if needed.
I've run it many times and never had an issue and never noticed concerning shallower depths. I think the shallowest I ever saw was about 9'....
Do you have pictures of the electric motor and the make/model? I too don't think it would hurt it at low speeds. If you did, it would be...
Actually in the real world, with a C9 propped to achieve it's 2500rpm top end. At 1750rpm's you will usually see around 67% load. At 2250 rpm's...
Actually running most engines at 70% load, on 1 engine when the engine is propped to achieve lets say 2500 rpm's at 100% throttle/ 100% load using...
I know exactly the product you are looking to buy, have used it before on two vessels, and do not trust it and would not trust it. Period. I...
Have you verified engine temperature with an infra-red heat gauge? Could the engine intakes possibly be sucking air at this speed due to hull...
_2.jpg&contenttype=jpeg "Click for YF Listing Service")