I would not use an Automotive type engine cooling system flush on a 8v92 as it has rubber o-rings for the cylinder head gaskets and it may eat...
Some companies make a product that you can use to flush out the saltwater side of the heat exchangers, I would bypass the raw water pump if doing...
I think you just like to argue to argue, and have taken what I wrote out of context. My origional post stated nothing about breaking wake laws...
Loss of pumping capacity/efficiency due to the height of the thru-hulls and length of the hoses to them(HEAD). If you noticed it says probably...
I am sure it is a horrific death for the manatee when it gets hit by a propellor, but they mostly die from Natural causes and usually it is a...
I was referring to the pump airlocking. With the float switch 2-3" above the bilge water, there should be enough water depth and waterflow to the...
Dates change depending on County in Florida. Also most of Palm Beach County to Dade County is slow speed on weekends in the channel too. Dade...
One thing that would greatly help your boat IMO, would be a rule 4000 or even a rule 8000 (single discharge hose), mounted near the rear of the...
Wow, that is a major refit. It sounds like you took the time and the money to do it right. Do you have any pictures of her, I would like to see...
The one at the show was a sistership to the one in the article. Not sure if it had all of the extra gear on this one or not. What really...
Personally, I like the Rule 2000's much better then the rule 3700now4000gph pumps. I've seen on many boats I've run, where the rule 3700's/4000's...
Last I heard, Hatteras did 2-80' Motoryachts, 3-72' Motoryachts, and a 63' Sportfish before the show was even over. I don't think I would be...
I think it would be cheaper and you'd have better accomodations renting in these countries then trying to ship a "house-boat" or even a yacht...
Thats where the problem lies. If it's cheap and easy to get a pump out at a marina, I would say most all yachters/boaters would do one instead of...
I have also seen where someone cut the hose in 2 pieces going from the macerator pump to the seacock and blocked off both ends. In addition to...
The guys mentioned that the boat was completely smooth and never felt like it was out of control or "loose". They said it felt like you were...
Electrolyses from the electricity in the water and from the vessel itself and vessels around it from their shorepower. Powdercoating is much more...
Teak and Holly floors are usually pretty good against getting dings and usually have a hard epoxy on them such as the west system. I have seen...
No, when they took the guys out for a ride they got it up to 144mph in biscayne bay. The mercury guys say they have reached a top speed of 177mph...
